| PC材质纯净水桶 |
| 添加时间：2018/9/5 16:35:33 浏览次数： |
| PC是聚碳酸酯的简称，聚碳酸酯的英文是Polycarbonate， PC is the abbreviation of polycarbonate, the English of polycarbonate is Polycarbonate. 简称PC工程塑料。PC是一种综合性能优良的非晶型热塑性树脂， Referred to as PC engineering plastics. PC is an amorphous thermoplastic resin with excellent comprehensive properties. 具有优异的电绝缘性、延伸性、尺寸稳定性及耐化学腐蚀性，较 It has excellent electrical insulation, elongation, dimensional stability and chemical corrosion resistance. 高的强度、耐热性和耐寒性；还具有自熄、阻燃、无毒、可着色 It has high strength, heat resistance and cold resistance. It also has self extinguishing, flame retardant, non-toxic and coloring. 等优点。 And so on. PC桶材质比较硬。熔点高，耐高温，PC桶的熔点在280度。在 PC barrel material is hard. The melting point is high and the heat resistance is high. The melting point of PC barrel is 280 degrees. stay 通常情况下温度不超过180度就不会对桶产生任何质变。开水的 Normally, no temperature changes will occur if the temperature does not exceed 180 degrees. Open water 温度通常是在100度左右，所以，PC桶可以直接装开水，并且不会 The temperature is usually around 100 degrees, so PC barrels can be installed directly, and will not. 发生任何变化。 Any changes. 因此，PC材质应用在纯净水桶中，是再好不过了。 Therefore, the application of PC material in the pure water bucket is no better. |
| 上一页 PC纯净水桶的标准 |
| 下一页 PC纯净水桶和PET纯净水桶的区别 |
Copyright © 技术支持：遨游网络