| PC纯净水桶和PET纯净水桶的区别 |
| 添加时间：2018/8/29 15:05:09 浏览次数： |
| PC是聚碳酸酯的简称，聚碳酸酯的英文是Polycarbonate， PC is the abbreviation of polycarbonate, the English of polycarbonate is Polycarbonate. 简称PC工程塑料。PC是一种综合性能优良的非晶型热塑性树脂， Referred to as PC engineering plastics. PC is an amorphous thermoplastic resin with excellent comprehensive properties. 具有优异的电绝缘性、延伸性、尺寸稳定性及耐化学腐蚀性，较 It has excellent electrical insulation, elongation, dimensional stability and chemical corrosion resistance. 高的强度、耐热性和耐寒性；还具有自熄、阻燃、无毒、可着色 It has high strength, heat resistance and cold resistance. It also has self extinguishing, flame retardant, non-toxic and coloring. 等优点。 And so on. PC桶材质比较硬。熔点高，耐高温，PC桶的熔点在280度。在 PC barrel material is hard. The melting point is high and the heat resistance is high. The melting point of PC barrel is 280 degrees. stay 通常情况下温度不超过180度就不会对桶产生任何质变。开水的 Normally, no temperature changes will occur if the temperature does not exceed 180 degrees. Open water 温度通常是在100度左右，所以，PC桶可以直接装开水，并且不会 The temperature is usually around 100 degrees, so PC barrels can be installed directly, and will not. 发生任何变化。 Any changes. 因此，PC材质应用在纯净水桶中，是再好不过了。 Therefore, the application of PC material in the pure water bucket is no better. PET材质的纯净水桶 PET material pure water bucket 聚对苯二甲酸乙二醇酯，英文名：polyethylene terephtha Polyethylene terephthalate, English Name: polyethylene terephtha late，简称PET，为高聚合物，由对苯二甲酸乙二醇酯发生脱水 Late, referred to as PET, dehydrated ethylene terephthalate for high polymers. 缩合反应而来。 Condensation reaction. PET 是乳白色或浅黄色、高度结晶的聚合物，表面平滑有 PET is a milky or yellowish, highly crystalline polymer with smooth surface. 光泽。PET桶材质比较软，透明度比较高。 Lustre. PET barrels are soft and transparent. PET桶曾经在电视中爆出过饮水安全问题。长期饮用PET桶装 PET barrels once reported drinking water safety problems on TV. Long term consumption of PET barreled 水的致癌概率比普通概率高出27%。我国的国家质监局也曾经禁止 The probability of carcinogenesis of water is 27% higher than that of ordinary probability. China's National Quality Supervision Bureau has also banned. PET材质在水桶中的应用。 Application of PET material in bucket. PET不耐热，在该材质的桶暴漏在高温或者开水中时候，该种 PET is not heat resistant, when the material bucket is leaking in high temperature or open water. 材质就会受热分解产生出有害的毒素。PET材质应用在水桶中，它 The material will be decomposed by heat and produce harmful toxins. The PET material is used in the bucket. 可以应用在不加热的饮料瓶中。 It can be applied to unheated beverage bottles. |
| 上一页 PC材质纯净水桶 |
| 下一页 PET材质在水桶中的应用 |
Copyright © 技术支持：遨游网络