塑料水桶的适用范围及功能 Scope and function of plastic bucket 塑料水桶适用范围： Plastic bucket applicable range: 塑料包装桶多用于各种液体的储存和运输，对特殊危险品具有良好的特性，他有不易碎、不生锈、质轻、不易变形等特点，而且耐油、耐强腐蚀性能好优异，对用于需要保温防潮、耐压、抗腐蚀的危险品包装。 多用于盛装化工原料、农药、润滑剂、涂料、医药、食品、五金电子、机电等行业液体、固体物品。规格从100mL—200L。 Plastic packaging barrels for storage and transportation of various liquid, has good characteristics of special dangerous goods, he has the characteristics of non friable, no rust, light weight, easy deformation, strong corrosion resistance and oil resistance, excellent performance, on the need for moisture-proof insulation, insulation, corrosion resistant packaging of dangerous goods. It is used to hold liquid, solid, chemical, material, pesticide, lubricant, coating, medicine, food, hardware, electronics, mechanical and electrical industries. Specifications from 100mL - 200L. 桶的功能和特点： Function and characteristics of bucket: 1. 塑桶美观内外光滑、无焊无缝、重量轻、强度好、耐冲击、耐腐蚀、无毒无味、运输方便。 1., plastic barrel beautiful, smooth inside and outside, seamless without welding, light weight, good strength, impact resistance, corrosion resistance, non-toxic, tasteless, easy transportation. 2．使用寿命长，在正常灌装、运输和装卸条件下，保质期1.5年。 2., long service life, under normal filling, transportation and loading and unloading conditions, the shelf life of 1.5 years. 3 产品技术参数严格执行国家标准，产品外观设计和产品尺寸也可以根据需要量身定做。 3, product technical parameters strictly comply with national standards, product design and product size can also be tailored according to needs. 4. 可用于热灌装，一般温度应不超过60℃。热灌装后，应等盛装物充分冷却并降到室温后才能关紧盖子和堆码。 4. can be used for hot filling, the general temperature should be no more than 60 degrees. Hot filling, etc. should be contained objects and the full cooling down to room temperature in order to shut the lid and stacking. 5. 如果盛装易分散的化学物品，可以配用带排气功能的盖子，以避免在运输途中出现超压的为危险，同时又能保证对液体的密封性能。 5. if a chemical substance is easily dispersed, a hood with an exhaust function can be provided to avoid danger of excessive pressure during transit and to ensure liquid sealing performance. 产品特点：仓储垛码堆放、罐装，全过程极大地节省空间、节省材料。重量轻、耐低温、耐腐蚀，减少污染，超级清洁，同时具有具有耐酸、耐碱、耐高温、无毒、无菌、无味，并具有优良的耐伸缩性和耐冲击性能符合医用检测的要求。 Product features: storage, stacking, canning, the whole process greatly saves space and saves materials. Light weight, low temperature resistance, corrosion resistance, reduce pollution, super clean, both with acid and alkali, high temperature resistant, non-toxic, sterile, tasteless, and has excellent flexibility and impact resistance performance meets the requirement of medical test. 生产原料： Production material: 生产塑料桶的主要原料是聚乙烯（Polyethylene,PE），简称PE，是乙烯进行加聚而成的高分子有机化合物。聚乙烯是世界上公认的接触食品最佳材料，无毒、无味、无臭，符合食品包装卫生标准。聚乙烯薄膜，轻盈透明，具有防潮、抗氧、耐酸、耐碱、气密性一般，热封性优异等性能，素有“塑料之花”的美称，是塑料包装印刷用量最多、最重要的材料。 The main raw material for producing plastic barrels is polyethylene (Polyethylene, PE), referred to as PE. It is a high polymer organic compound which is made up of ethylene. Polyethylene is recognized as the best food for contact food in the world. It is non-toxic, tasteless and odorless, and conforms to the hygienic standard for food packaging. Polyethylene film, transparent, moistureproof, anti oxygen, acid and alkali resistance, air tightness, heat sealing and other excellent properties, known as "plastic flower" reputation, plastic packaging and printing volume is the largest and most important materials. 高密度聚乙烯，简称HDPE。密度为0.941～0.965g/立方厘米。用低压聚合而成，故又称低压聚乙烯。呈乳白色。加工可用吹塑法和T模挤出工艺。耐热耐蒸煮，耐寒耐冷冻，防潮、防气、隔绝性能好，并不易破损，强度为LDPE的二倍 High density polyethylene, referred to as HDPE. The density is 0.941 to 0.965g/ cubic centimeters. It is made of low pressure polymerization, so it is also called low-pressure polyethylene. Milky white. The processing can be made by blow molding and T extrusion. Heat resistant, resistant to cooking, cold resistant, resistant to freezing, moisture resistant, gas proof and isolating, it is not easy to be damaged, and the strength is two times of LDPE